品牌:杜笙
规格1:规格1未填写
规格2:规格1未填写
规格3:规格1未填写
起订:1公升
供应:100000000公升
发货:3天内
发送询价
T-42 UPS 強酸型阳性離子交换樹脂 ,是一款有較高的交换容量 ,及同时擁有絕佳的物理及化學穏定品貭。可应用於汽电共生发电廠冷凝水处理及混床系統, 去除水中的阳性離子 。
杜笙Tulsion T-42 UPS --------------均粒强酸形阳树脂 , 氢 H+ / 钠 Na+
均粒强酸性阳离子适用于超 纯水的可再生混床系统
MonOSPHERE STRONG CATIonIC ION EXCHANGE RESIN FOR REGENERABLE MB
杜笙Tulsion® T-42 UPS 強酸型阳性離子交换樹脂 ,是一款有較高的交换容量 ,及同时擁有絕佳的物理及化學穏定品貭。可应用於汽电共生发电廠冷凝水处理及混床系統, 去除水中的阳性離子 。
杜笙 Tulsion T-42 UPS 其均勻的颗粒直径, 能取代传统的離子交换樹脂, 並可以减少壓 力损, 可以和 杜笙Tulsion® A-23 UPS 一起搭配使用於2B3T及超纯水可再生的混床。
TYPICAL CHARACTERISTICS – 基本特性
型式(Type):Strong acid Cation exchange resin
主体結構(Matrix structure):Cross linked polystyrene
功能基(Functional group):Sulphonic
物理形式(Physical form):Moist spherical beads.
離子型式(Ionic form):Hydrogen (H+)
粒径Particle size ( 英國Mesh):Particle less than 0.3mm max. 1%
均勻係数(Uniformity Coefficient)：1.25 Min
平均粒径(Mean bead Size (mm))：0.58 ( +/- 0.05)
全交换容量(Total Exchange Capacity):1.80 meq/ ml (min.) in H+ form
含水份(Moisture content (approx.)):Approximately 53% in H+form
pH范围(pH range):0 to 14
膨脹係数(Swelling (approximately)):-7% from Na+ to H+ form.
密度(Backwash settled density):800-840 g/l in H+ form；830-870 g/l in Na+ form
允许温度(Maximum temp. stability):120°C in H+ form；140°C in Na+form
溶解率(Solubility):Insoluble in all common solvents.
OPERATION ConDITIONS – 操 作 条 件
最大操作溫度(Operating temperature , max 0 C):120
操作pH范围(Operating pH range ):0 – 14
最小樹脂床高度(Bed depth , mini mm):800
最大(Service flow rate ,Maxi ):120 m3/hr/ m3
逆洗水量(Backwash flow rate):9 to 25 m3/hr/ m3
逆洗浮動空間(Back wash expansion):40 to 75%
再生藥剤(Regenerant ):HCl, H2SO4 for H+ form,
再生藥剂用量(Regeneration levels. ):30 to 120 gms HCl/ lit.；40 to 250 gms H2SO4/ lit.
再生藥剂浓度(Regeneration conceation):3 - 5% HCl, 1.5 to 3% H2SO4
最少通再生藥剂时间(Regeneration Contact time, mini):-20 min.
再生流量(Regeneration flow rate ):5 to 16 m3/hr/ m3
Regeneration slow rinse:2 BV mini.
快洗用水(Fast Rinse ):Service flow rate.
快洗水量(Fast Rinse Volume):2 to 3 BV
均粒强酸性阳离子适用于超 纯水的可再生混床系统
MonOSPHERE STRONG CATIonIC ION EXCHANGE RESIN FOR REGENERABLE MB
杜笙Tulsion® T-42 UPS 強酸型阳性離子交换樹脂 ,是一款有較高的交换容量 ,及同时擁有絕佳的物理及化學穏定品貭。可应用於汽电共生发电廠冷凝水处理及混床系統, 去除水中的阳性離子 。
杜笙 Tulsion T-42 UPS 其均勻的颗粒直径, 能取代传统的離子交换樹脂, 並可以减少壓 力损, 可以和 杜笙Tulsion® A-23 UPS 一起搭配使用於2B3T及超纯水可再生的混床。
TYPICAL CHARACTERISTICS – 基本特性
型式(Type):Strong acid Cation exchange resin
主体結構(Matrix structure):Cross linked polystyrene
功能基(Functional group):Sulphonic
物理形式(Physical form):Moist spherical beads.
離子型式(Ionic form):Hydrogen (H+)
粒径Particle size ( 英國Mesh):Particle less than 0.3mm max. 1%
均勻係数(Uniformity Coefficient)：1.25 Min
平均粒径(Mean bead Size (mm))：0.58 ( +/- 0.05)
全交换容量(Total Exchange Capacity):1.80 meq/ ml (min.) in H+ form
含水份(Moisture content (approx.)):Approximately 53% in H+form
pH范围(pH range):0 to 14
膨脹係数(Swelling (approximately)):-7% from Na+ to H+ form.
密度(Backwash settled density):800-840 g/l in H+ form；830-870 g/l in Na+ form
允许温度(Maximum temp. stability):120°C in H+ form；140°C in Na+form
溶解率(Solubility):Insoluble in all common solvents.
OPERATION ConDITIONS – 操 作 条 件
最大操作溫度(Operating temperature , max 0 C):120
操作pH范围(Operating pH range ):0 – 14
最小樹脂床高度(Bed depth , mini mm):800
最大(Service flow rate ,Maxi ):120 m3/hr/ m3
逆洗水量(Backwash flow rate):9 to 25 m3/hr/ m3
逆洗浮動空間(Back wash expansion):40 to 75%
再生藥剤(Regenerant ):HCl, H2SO4 for H+ form,
再生藥剂用量(Regeneration levels. ):30 to 120 gms HCl/ lit.；40 to 250 gms H2SO4/ lit.
再生藥剂浓度(Regeneration conceation):3 - 5% HCl, 1.5 to 3% H2SO4
最少通再生藥剂时间(Regeneration Contact time, mini):-20 min.
再生流量(Regeneration flow rate ):5 to 16 m3/hr/ m3
Regeneration slow rinse:2 BV mini.
快洗用水(Fast Rinse ):Service flow rate.
快洗水量(Fast Rinse Volume):2 to 3 BV
