规格1:规格1未填写
规格2:规格1未填写
规格3:规格1未填写
发货:3天内
发送询价
2CK-1S伞齿轮产品参数
1.该装置是直接安装在闸阀和截止阀上的手动装置。
2.该装置采用弧齿锥齿轮和平面推力轴承，有运转平稳，扭矩大，噪音小，效率高的优点。
3.在所有的结合部，采用了密封胶全密封处理，达到了防水，防油渗漏的效果，防护等级为IP65。
4.手轮和阀杆罩可根据用户需求定制。
1.It is easy opening & closing that the gear box are directly mounted on Gate & Globe valve under thrust loads.
2.The gear box enable efficiency to rise over 90%.which consists of suitable bearing.
3.Regarding gear,It makes the gear box relax from noise under optimum heat treatment & precise grinding.
4.It can oid from waterproof & oil leakage as sophisticated oil seal is used at the through part.Protection Grade Can be IP65.
5.Hand wheel & stem cover are optional index.
2CK-1S伞齿轮技术参数 Technical Data Sheet
| ╲ SIZE ╲ MODEL ╲ |
Gear Ratio 速比 |
Max Stem Diameter 最大阀杆直径 |
Max Thrust Capacity 最大推力 |
Max Output Torque 最大输出扭矩 |
M.A. 机械效益 |
Weight 重量 |
||
| mm | KN | Kgf | N.m | Kgf.m | ±10% | Kg | ||
| 2CK2-1S | 13.6:1 | 70 | 290 | 29592 | 2350 | 240 | 9.5 | 52 |
| 2CK3-1S | 17.6:1 | 80 | 400 | 40816 | 3200 | 327 | 12.3 | 70 |
| 2CK5-1S | 22:1 | 95 | 500 | 51020 | 3900 | 398 | 15.5 | 115 |
| 2CK8-1S | 42.5:1 | 110 | 800 | 81633 | 7000 | 714 | 29.5 | 205 |
| 2CK10-1S | 48:1 | 130 | 1100 | 112244 | 10000 | 1020 | 34 | 300 |
| 2CK15-1S | 94.4:1 | 150 | 1250 | 127551 | 15500 | 1582 | 65 | 470 |
| 2CK18-1S | 115.5:1 | 160 | 1500 | 153061 | 22000 | 2245 | 80 | 645 |
| 尺寸表 DIMENSION | Unit:mm |
| ╲ DIN ╲ MODEL ╲ |
base PART 底座部分 | EXTERNAL PART 外形尺寸 | INPUT SHAFT PART 输入轴部分 |
HAND WHEEL 手轮 |
|||||||||||||
| TYPE 类型 |
FLANGE SIZE 法兰号 |
ΦD1 | P.C.D | ΦD3 | H | H1 | H2 | H3 | K | L2 | L | ||||||
| D2 | N-H-DP | L1 | ΦPD | KEY | ΦM | ||||||||||||
| 2CK2-1S | A | (F-20) | 140 | 205 | 8-M16-24 | 250 | 5 | 89 | 120 | 144 | 270 | 400 | 305 | 38 | 32 | 8X7 | 500 |
| 2CK3-1S | F-25 | 200 | 254 | 8-M16-24 | 300 | 97 | 130 | 156 | 290 | 470 | 330 | 550 | |||||
| 2CK5-1S | F-30 | 230 | 298 | 8-M20-30 | 350 | 120 | 163 | 188 | 315 | 530 | 390 | 600 | |||||
| 2CK8-1S | F-35 | 260 | 356 | 8-M30-45 | 415 | 152 | 225 | 250 | 385 | 640 | 480 | 35 | 10X8 | 700 | |||
| 2CK10-1S | F-40 | 300 | 406 | 8-M36-54 | 475 | 8 | 176 | 290 | 320 | 420 | 660 | 500 | |||||
| 2CK15-1S | B | F-48 | 370 | 483 | 12-M36-54 | 560 | 8 | 188 | 320 | 350 | 510 | 750 | 550 | 44 | 45 | 12X8 | 800 |
| 2CK18-1S | C | F-60 | 470 | 603 | 20M36-54 | 686 | 8 | 230 | 335 | 365 | 540 | 810 | 610 | 44 | 45 | 12X8 | 800 |
公司主要产品有普通型（代号ＱＤＸ３）、配电动型（代号ＱＤＸ３－Ｄ）、双级型（代号ＱＤＸ３－Ｓ）、出口型（代号ＷＱＤＸ３）等类型的蜗轮箱，ＢＡ型美标弧齿轮传动
